HONDA 17311-K35-V00 Abs Intake Manifold Boot

( Manufacturer Part Number: 17311-K35-V00 ), ( Part Type: Intake Manifold Boot )

Review HONDA Abs Intake Manifold Boot fits CB300R 2022

The **Honda 17311-K35-V00 CB300R ABS Intake Manifold Boot** is a precision-engineered component designed exclusively for the Honda CB300R model equipped with Anti-lock Braking System (ABS), ensuring optimal airflow and reliability under performance demands. Crafted from high-quality, durable rubber with reinforced internal stitching, this intake manifold boot serves as a critical seal between the air intake system and the throttle body, preventing vacuum leaks that could compromise engine efficiency, throttle response, and overall performance. Its snug, interference-fit design guarantees a secure connection, minimizing the risk of air infiltration while maintaining structural integrity even under dynamic riding conditions. The boot s smooth, tapered profile is engineered to accommodate the specific contours of the CB300R s intake system, allowing for easy installation without the need for modification or excessive force. Whether you're pursuing spirited rides, track days, or simply seeking to restore factory performance, this OEM-replacement boot ensures a tight, consistent seal that aligns with Honda s engineering standards. Built to withstand the thermal and mechanical stresses of daily riding, this component is a straightforward yet essential upgrade for maintaining peak engine function and longevity in your CB300R.

Buying the **Honda 17311-K35-V00 CB300R ABS Intake Manifold Boot** (also known as the throttle body cover or intake boot) involves weighing several factors based on your needs, budget, and the condition of your bike. Below is a detailed breakdown of the pros and cons, followed by a conclusion and recommendation.

---

### **Pros of buying a OEM Intake Manifold Boot**

1. **Perfect Fit and Compatibility**

The OEM part is designed specifically for the **CB300R ABS (2019 2023 models)**. It ensures a seamless fit without modifications, reducing the risk of leaks or improper installation. Aftermarket parts may not align perfectly with your bike s geometry, leading to potential issues like airflow restrictions or damage to surrounding components.

2. **High-Quality Materials**

Honda uses durable materials in their OEM parts, including reinforced rubber and plastic components that are resistant to heat, oil, and fuel exposure. This ensures longevity, especially if you ride frequently or in harsh conditions.

3. **Warranty Coverage**

If purchased directly from Honda or an authorized dealer, the part may come with a warranty (typically 1 2 years). This provides peace of mind in case of defects or premature failure. Aftermarket parts usually lack such guarantees.

4. **Reliability and Performance**

The OEM boot is engineered to work optimally with the CB300R s engine management system. A properly fitted intake boot ensures consistent airflow, which is critical for throttle response, fuel efficiency, and engine performance. Aftermarket alternatives might introduce minor performance variances or even void warranties if not compatible.

5. **Ease of Installation**

OEM parts are straightforward to install, especially if you re familiar with basic bike maintenance. The design is consistent with the rest of the intake system, making it easier to replace without additional tools or adjustments.

6. **Resale Value**

If you plan to sell or trade in your bike later, having OEM parts (including the intake boot) can make the vehicle more appealing to buyers who prefer stock configurations. Aftermarket modifications may deter some potential buyers.

7. **Avoiding Modification Risks**

- **Fuel delivery problems** (if the ECU isn t tuned for the change).

- **Vacuum leaks** (if the seal isn t perfect).

- **Voided warranties** (if the modification isn t approved by Honda).

The OEM boot eliminates these risks entirely.

---

### **Cons of buying a OEM Intake Manifold Boot**

1. **Higher Cost**

The OEM part is more expensive than aftermarket alternatives. For example, the **Honda 17311-K35-V00** typically retails for **$30 $50**, while aftermarket boots (e.g., from brands like **K&N, Akrapovic, or local tuners**) may cost **$10 $25**. This can be a significant expense if you re on a tight budget.

2. **Limited Customization**

If you re looking to modify the bike for better performance (e.g., reducing intake restriction for more power), the OEM boot won t offer any advantages. Aftermarket boots or full intake systems (e.g., **K&N cold air intakes**) can provide noticeable gains, though they require tuning adjustments.

3. **Potential for Counterfeit Parts**

Purchasing from unauthorized sellers (e.g., eBay, Amazon, or untrusted online marketplaces) increases the risk of receiving a **counterfeit or low-quality replica**. These parts may fail prematurely, leak, or not fit properly. Always buy from **Honda-approved dealers, authorized distributors, or reputable bike parts stores** to avoid this issue.

4. **Longer Lead Times**

OEM parts may not always be in stock at local dealers, requiring you to order online or wait for delivery. Aftermarket parts are often available immediately from various retailers.

5. **Overkill for Minor Repairs**

If the boot is only slightly damaged (e.g., a small crack or minor wear), some riders might opt for a **cheaper aftermarket replacement or DIY repair** (e.g., using silicone sealant) instead of buying a full OEM part. However, this is **not recommended** for safety reasons, as a faulty boot can lead to **vacuum leaks, rough idling, or even engine damage**.

---

### **Pros of Aftermarket Alternatives (Brief Comparison)**

- **Lower cost** (if you don t need OEM quality).

- **Performance tuning potential** (some boots are designed to reduce restriction).

- **Easier availability** (often stocked at local bike shops).

However, they come with the cons mentioned earlier (potential compatibility issues, lack of warranty, and risk of voiding warranties).

---

### **Conclusion**

- You prioritize **fit, quality, and reliability** over cost savings.

- You want to **maintain warranty coverage** or keep the bike in stock condition.

- You re replacing a **failed or damaged boot** and don t need performance modifications.

- You re buying from a **trusted source** to avoid counterfeit parts.

- You re on a **tight budget** and the boot is only slightly damaged.

- You re planning **performance modifications** and can source a high-quality aftermarket part with proper tuning.

- You re confident in **DIY repairs** (though this is not recommended for critical components like the intake boot).

---

### **Final Recommendation**

1. You need a **direct replacement** for a failed or damaged part.

2. You want **guaranteed compatibility** and **long-term reliability**.

3. You re purchasing from an **authorized dealer or Honda-approved seller** to avoid counterfeits.

4. You re not planning any **intake-related modifications** (e.g., cold air intakes, throttle body upgrades).

- You ve **researched thoroughly** and found a **high-quality, compatible part** (e.g., from a reputable brand like **K&N or Akrapovic**).

- You re **prepared to tune the ECU** if the aftermarket part affects airflow.

- You re **certain the bike s warranty won t be voided** by the modification.

- **Honda Dealers** (most reliable, but may have higher prices).

- **Authorized Online Retailers** (e.g., **Honda Parts Online, Cycle World, RevZilla**).

- **Local Bike Shops** (call ahead to confirm stock and authenticity).

- Unverified eBay sellers, Amazon third-party sellers, or unknown online marketplaces (high risk of counterfeits).

- "Cheap" aftermarket boots unless you re certain they re compatible and safe.

---

### **Additional Tips**

- **Inspect the boot thoroughly** before purchasing to ensure no cracks, warping, or damage.

- **Check for recalls** (though this part is unlikely to be recalled, verify via Honda s website).

- **Consider a full intake system** (e.g., **K&N cold air intake**) if you re looking for performance gains, but only if you re prepared for tuning.

- **Follow Honda s maintenance schedule** to prevent premature wear of the boot or related components.

In summary, the **OEM boot is the safest and most reliable choice** for most riders, balancing quality, fit, and longevity just ensure you buy it from a trusted source.

Details:

Was removed from a running 2022 Honda CB300R ABS. Comes as pictured.: Manifold is in good condition with no cracks. Items are shipped using USPS, UPS, and FedEx.

Finish has only light wear.

part #: 17311k35v00 price

• $19.99

specifications atvhosesfilters:

• for models: Cb300r
• for makes: Honda
• for years: 2022
• mpn: 17311-k35-v00
• part type: Intake Manifold Boot

general atvhosesfilters:

• condition: Used
• ATV, Side-by-Side UTV Parts Accessories > Air Intake Fuel Delivery > Air Hoses, Lines Pipes

payments atvhosesfilters:

• credit card: Visa
• wallet: Paypal
• other

returns atvhosesfilters:

• paid by: Seller
• time: 30 Days
• policy: Returns Accepted

offer atvhosesfilters:

• started: February 8, 2026
• quantity: 1
• availability: In Stock
• best offers: True
• sold: 0
• options: Ship-to-home

seller atvhosesfilters:

• city: Ashaway, Rhode Island
• # reviews: 97015
• rating: 99.8%

shipping atvhosesfilters:

• cost: $0.00
• transit: 4-9 Days
• type: Calculated
• carrier: USPS, UPS
• class: Standard, Expedited, One-day
• service: USPS Ground Advantage, USPS Priority Mail Flat Rate Envelope, UPS Next Day Air, UPS 2nd Day Air

Honda 17311-K35-V00 Is Similar To:

• 16210-437-000 Honda Atc Intake Manifold Boot (57.1% similar) We most often are able to combine shipping if multiple items purchased. The threads are good. This item is in good condition. Good: this is a used part that in good working order. It is still a usable part. Or it is a part with small mechanical problem but still usable. Ratings for item condition ...(November 5th, 2018)
• 86 Atc250r Nos Manifold Trx Atc 250r 16210-ha2-770 Honda 86-89 Intake (27.6% similar) This is a brand new intake manifold assembly to fit the 1986 ACT 250R as well as TRX 250R, these are hard to come by and are prone to cracking dont miss out...(January 29th, 2015)
• 16211-hc4-003 Honda Fourtrax Intake Manifold Carburetor Boot (49.1% similar) Comes as pictured. Items are shipped using USPS, ups, and FedEx. Will fit the years and model's in compatibility list. Finish has only light wear. Was removed from a 1988 honda footrace 300 4X4, TRX300FW. Please through messages. Manifold is in good condition with no cracks...(March 1st, 2018)
• 16211-hn1-010 Honda Intake Manifold Carburetor Boot (49.5% similar) Manifold is in good condition with no cracks. Finish has only light wear. Was removed from a 2002 honda TRX400EX 2X4. Please through messages. Items are shipped using USPS, ups, and FedEx. Comes as pictured...(June 18th, 2018)
• 17210-hb3-000 Honda Air Box Intake Tube Filter (36% similar) But all very good. Off 86 TRX200SX no cracks boot to carb is a little stiff...(July 31st, 2018)
• 17252-958-680 Honda Air Box To Frame Rubber Intake Boot Atc (37.2% similar) This boot goes from the left side of frame to air box. Great well packaged, as DISCRIBED2018 nice. 95 1983 200E honda ACT 200 e air box to frame rubber intake boot product this is. Isn't cracking or weather checked. Shipping orders are shipped the same day if made by 3PM MST m-f. Featured items ...(September 30th, 2018)
• 17253-ha5-000 Honda Atc 350x Intake (36% similar) Honda ACT 350X intake pipe clamps HA5-000 fits...(September 3rd, 2017)
• Oem 1990 Fl400 17253-he0-000 Honda Fl400r Nos Pilot 1989 Hose Air Intake 400 (29.2% similar) This is the air intake hose that runs from the air box to the carburetor or 1990 honda pilot FL400R nos oem air intake hose HE0 still sealed in its original package. Shipping is to the lower 48 states only. Beautiful new...(February 8th, 2015)
• 17259-hn1-000 Honda Clutch Snorkel Intake Vent Tube (34.3% similar) Tube is in good condition with no cracks. Finish has light wear. Comes as pictured. Items are shipped using USPS, ups, and FedEx. Was removed from a 2002 honda TRX400EX 2X4. Please through messages...(June 18th, 2018)
• 250abe-atc-r2 Bdt Motorsports Honda Atc Air Box Eliminator Kit New Intake (23.6% similar) New for honda ACT 250R trike VDT motor sports tuned eliminator kit oem and big bore engines 250 up to 500CC. Will not work with oem Khan pk carb. A very good bolt on hp torque improvement offers noticeable performance increase across the board must be used with Khan pk carburetor. Contact Carlos at ...(November 1st, 2018)
• 250abe-trx Bdt Motorsports Honda Trx Air Box Eliminator Kit Filter Intake (25.2% similar) Shipping charges listed are for lower 48 states only. Will not work with oem Khan pk carb. Contact Carlos at VDT motor sports for any questions. Kit is brand new never mounted or used. New for honda TRX250R VDT motor sports tuned eliminator kit oem 250R and big bore engines 250 up to 500CC. Must be ...(May 27th, 2018)