HONDA 17262-HN7-000 Air Duct Boot Chamber Tube

( Manufacturer Part Number: 17262-HN7-000 ), ( Type: Air Box Boot )

Review HONDA Air Duct Boot Sub Chamber Tube fits FOREMAN TRX500FM 500 2012–2019

The **Honda 17262-HN7-000 2012 2019 Foreman 500 TRX500FM Air Duct Boot Chamber Tube** is a precision-engineered replacement component designed to maintain the optimal performance and longevity of your Honda Foreman 500 or TRX500FM off-road utility vehicle. This high-quality rubberized air duct boot, identified by its OEM part number, serves as a critical seal between the engine s air intake system and the surrounding components, ensuring a tight, leak-free connection that prevents dust, debris, and moisture from infiltrating the engine bay. Crafted from durable, heat-resistant rubber with reinforced stitching, this chamber tube is engineered to withstand the harsh conditions of off-road use, including exposure to rocks, mud, and extreme temperatures, while also resisting cracking or degradation over time. Its snug fit and ergonomic design make installation straightforward, allowing mechanics and DIY enthusiasts alike to restore factory-level sealing efficiency with minimal effort. Whether replacing a worn-out original component or upgrading for enhanced durability, this aftermarket part adheres to Honda s stringent specifications, ensuring compatibility with the vehicle s air filtration system and contributing to smoother engine operation, reduced carbon buildup, and improved fuel efficiency. Ideal for riders who demand reliability in demanding environments, this boot chamber tube is a straightforward yet essential upgrade for maintaining the performance and resale value of your Foreman 500 or TRX500FM.

The Honda 17262-HN7-000 (2012 2019 Foreman 500 TRX500FM) air duct boot, chamber tube, and related components are critical parts for maintaining proper exhaust flow, emissions compliance, and engine performance. Below is a detailed breakdown of the pros and cons of purchasing these parts, followed by a conclusion and recommendation.

---

### **Pros of buying a Honda 17262-HN7-000 (or Equivalent) Parts**

1. **OEM Quality and Reliability**

- Honda is known for durable, high-quality manufacturing. OEM parts like the air duct boot and chamber tube are designed to match the original specifications, ensuring a proper fit and long-term performance. This reduces the risk of premature failure or compatibility issues.

2. **Emissions Compliance**

- The Foreman 500 TRX500FM is equipped with emissions control systems (such as the catalytic converter and EGR system) that rely on proper airflow and sealing. The air duct boot and chamber tube play a role in maintaining optimal exhaust gas flow and pressure. Using genuine or high-quality aftermarket parts ensures the engine continues to meet emissions standards, avoiding potential failures during inspections or smog tests.

3. **Prevents Leaks and Performance Loss**

- Worn or damaged air duct boots and chamber tubes can cause exhaust leaks, leading to reduced engine power, increased fuel consumption, and potential damage to downstream components (e.g., catalytic converter or muffler). Replacing these parts proactively can restore proper exhaust flow and engine efficiency.

4. **Compatibility and Fit**

- The 17262-HN7-000 part number is specific to the 2012 2019 Foreman 500 TRX500FM, ensuring an exact fit. Aftermarket parts may not always match the OEM design, potentially leading to gaps, improper sealing, or even damage to the exhaust system.

5. **Warranty Coverage**

- Purchasing from an authorized Honda dealer or a reputable supplier often includes a warranty, providing peace of mind against defects. This is particularly valuable for parts that are critical to the engine s longevity.

6. **Ease of Installation**

- OEM parts are designed with the original installation process in mind. They typically come with clear instructions and may require minimal modifications, making the replacement job simpler for DIYers or mechanics.

7. **Resale Value Protection**

- Maintaining the original components of your Honda Foreman helps preserve its resale value. Potential buyers are more likely to pay a premium for a machine that has been well-maintained with genuine parts.

---

### **Cons of buying a Honda 17262-HN7-000 (or Equivalent) Parts**

1. **Higher Cost**

- OEM parts from Honda dealers are significantly more expensive than aftermarket alternatives. For example, the air duct boot and chamber tube may cost 2 3 times more than a generic aftermarket replacement. This can be a barrier for budget-conscious buyers.

2. **Limited Availability**

- While Honda parts are widely available, some specialized components (especially for older or less common models like the Foreman 500) may require ordering from a dealer or a parts distributor. This can lead to longer wait times compared to aftermarket options, which are often stocked at local auto parts stores.

3. **Overkill for Minor Issues**

- If the air duct boot or chamber tube is only slightly damaged or worn, replacing the entire OEM part may be excessive. In such cases, a high-quality aftermarket part or even a DIY repair (e.g., sealing with high-temperature silicone) might suffice, saving money without compromising performance.

4. **Potential for Counterfeit Parts**

- When purchasing from third-party sellers (especially online), there is a risk of receiving counterfeit or substandard parts. These may not fit properly, fail quickly, or even damage the exhaust system. Always buy from trusted sources with return policies or warranties.

5. **Environmental and Ethical Concerns**

- OEM parts contribute to electronic waste when replaced. While this is a minor concern for individual purchases, it s worth considering if you prioritize sustainability. Aftermarket parts, especially those made from recycled materials, may be a more eco-friendly option.

6. **Mixed Reviews on Aftermarket Alternatives**

- While aftermarket parts are cheaper, some users report issues with durability or fit. Not all aftermarket manufacturers prioritize the same level of quality as Honda, so research is essential. However, reputable brands (e.g., Dorman, Bosch, or specialized exhaust system manufacturers) often provide reliable alternatives.

---

### **Conclusion**

The decision to purchase the Honda 17262-HN7-000 (or equivalent) air duct boot and chamber tube depends on your priorities: **budget, reliability, emissions compliance, and long-term performance**. Here s how to weigh the options:

- Ideal if you want the highest quality, exact fit, and warranty coverage. This is the best choice if the parts are failing and you want to ensure emissions compliance and engine efficiency. The upfront cost is justified if you plan to keep the machine long-term or if the parts are critical to its operation.

- A cost-effective alternative if the parts are only slightly worn or if you re comfortable researching reputable brands. High-quality aftermarket parts from trusted manufacturers can offer comparable performance at a fraction of the cost. However, be cautious of low-quality alternatives that may fail prematurely.

- If the damage is minor (e.g., a small crack in the boot), sealing it with high-temperature silicone or replacing only the damaged section (if possible) can be a budget-friendly solution. This is best for temporary fixes or as a stopgap until you can afford a full replacement.

---

### **Recommendation**

- If the air duct boot or chamber tube is cracked, corroded, or leaking significantly, prioritize replacing it with a high-quality part to avoid further damage to the exhaust system or engine. In this case, **OEM or a reputable aftermarket brand** (e.g., Dorman 5000 series, Bosch, or a specialized exhaust manufacturer) is the safest choice.

- An authorized Honda dealer (for OEM parts).

- Local auto parts stores (e.g., AutoZone, O Reilly, NAPA) for aftermarket options.

- Online retailers (e.g., RockAuto, Amazon, eBay) for aftermarket parts, but verify seller ratings and return policies to avoid counterfeits.

- Calculate the total cost, including labor if you re not doing the installation yourself.

- If this is part of a larger exhaust system overhaul (e.g., replacing the muffler, catalytic converter, or pipes), it may make sense to invest in OEM parts for consistency. However, if you re only replacing these specific components and are on a tight budget, a high-end aftermarket part from a trusted brand could be a practical compromise.

- If the machine is older or has high mileage, weigh whether the cost of replacement is justified compared to the machine s remaining useful life.

- If you re not experienced with exhaust system repairs, consider having a professional install the parts to ensure proper sealing and alignment. Improper installation can lead to leaks or damage.

- **For most users, the best balance of cost and reliability is a high-quality aftermarket part from a reputable brand** (e.g., Dorman 5000 series, Bosch, or a manufacturer like **Exhaust Works** or **Performance Exhaust**). These parts are often 60 80% cheaper than OEM but still meet or exceed durability standards.

- You re replacing multiple critical components (e.g., entire exhaust system).

- You re selling the machine soon and want to maintain its value.

- You ve had issues with aftermarket parts in the past.

By carefully evaluating your needs and the condition of your machine, you can make an informed decision that balances cost, performance, and longevity.

Details:

Shipping: Shipping. This item works well. 2012 19 HONDA FOREMAN 500 TRX500FM Air Duct Boot Sub Chamber Tube 17262-HN7-000. Back in Action.

It does not have any rips. Removed from: 2012 Honda Foreman 500 TRX500FM 4x4. This Air Box Boot is in good condition. There is an option to purchase expedited shipping when checking out.

Where is my package coming from.

part #: 17262hn7000 prices

• $19.00-$39.95

specifications atvhosesfilters:

• for models: Trx500fm, 500, Foreman
• for makes: Honda
• for years: 2012-2019
• mpn: 17262-hn7-000
• type: Air Box Boot

seller atvhosesfilters:

• city: Hayden, Idaho
• rating: 99.9%
• # reviews: 7863

offer atvhosesfilters:

• quantity: 1
• options: Ship-to-home
• availability: In Stock
• sold: 0
• started: May 5, 2026

shipping atvhosesfilters:

• class: Standard
• type: Fixed
• service: USPS Ground Advantage
• carrier: USPS
• cost: $0.00
• transit: 3-7 Days

general atvhosesfilters:

• condition: Used
• ATV, Side-by-Side UTV Parts Accessories > Air Intake Fuel Delivery > Air Hoses, Lines Pipes

payments atvhosesfilters:

• other
• wallet: Google-pay
• credit card: Visa

returns atvhosesfilters:

• policy: Returns Accepted
• paid by: Seller
• time: 30 Days

Honda 17262-HN7-000 Is Similar To:

• 16210-437-000 Honda Atc Intake Manifold Boot (32.5% similar) We most often are able to combine shipping if multiple items purchased. The threads are good. This item is in good condition. Good: this is a used part that in good working order. It is still a usable part. Or it is a part with small mechanical problem but still usable. Ratings for item condition ...(November 5th, 2018)
• 16211-hc4-003 Honda Fourtrax Intake Manifold Carburetor Boot (30.2% similar) Comes as pictured. Items are shipped using USPS, ups, and FedEx. Will fit the years and model's in compatibility list. Finish has only light wear. Was removed from a 1988 honda footrace 300 4X4, TRX300FW. Please through messages. Manifold is in good condition with no cracks...(March 1st, 2018)
• 16211-hn1-010 Honda Intake Manifold Carburetor Boot (29.2% similar) Manifold is in good condition with no cracks. Finish has only light wear. Was removed from a 2002 honda TRX400EX 2X4. Please through messages. Items are shipped using USPS, ups, and FedEx. Comes as pictured...(June 18th, 2018)
• 17210-hb3-000 Honda Air Box Intake Tube Filter (32% similar) But all very good. Off 86 TRX200SX no cracks boot to carb is a little stiff...(July 31st, 2018)
• 17252-958-680 Honda Air Box To Frame Rubber Intake Boot Atc (26.1% similar) This boot goes from the left side of frame to air box. Great well packaged, as DISCRIBED2018 nice. 95 1983 200E honda ACT 200 e air box to frame rubber intake boot product this is. Isn't cracking or weather checked. Shipping orders are shipped the same day if made by 3PM MST m-f. Featured items ...(September 30th, 2018)
• 17253-268-030 Honda Nos Super Hawk New Air Cleaner Connecting Tube Oem (30.9% similar) Nos from honda excellent condition no longer available thru...(October 15th, 2018)
• Oem 1990 Fl400 17253-he0-000 Honda Fl400r Nos Pilot 1989 Hose Air Intake 400 (29.7% similar) This is the air intake hose that runs from the air box to the carburetor or 1990 honda pilot FL400R nos oem air intake hose HE0 still sealed in its original package. Shipping is to the lower 48 states only. Beautiful new...(February 8th, 2015)
• 17255-hn5-670 Honda Rancher Joint Breather Air Box Trx Fourtrax New (27.4% similar) ...(April 8th, 2019)
• 17259-hn1-000 Honda Clutch Snorkel Intake Vent Tube (24.6% similar) Tube is in good condition with no cracks. Finish has light wear. Comes as pictured. Items are shipped using USPS, ups, and FedEx. Was removed from a 2002 honda TRX400EX 2X4. Please through messages...(June 18th, 2018)
• 17265-hn2-000 Honda Rubicon 500 Air (28.1% similar) The corresponding oem part number for a 2001 honda foreman 500 Rubicon is are HN2 they may be included with free of charge. The video for this 2001 honda foreman 500 Rubicon can be seen here. Flat rate and free shipping service is for the lower 48 states only. This listing is for a used air box ...(November 12th, 2017)
• 250abe-atc-r2 Bdt Motorsports Honda Atc Air Box Eliminator Kit New Intake (23.7% similar) New for honda ACT 250R trike VDT motor sports tuned eliminator kit oem and big bore engines 250 up to 500CC. Will not work with oem Khan pk carb. A very good bolt on hp torque improvement offers noticeable performance increase across the board must be used with Khan pk carburetor. Contact Carlos at ...(November 1st, 2018)